Polyurethane 310ml Non Toxic Silicone Sealant Clear Silicone Adhesive For Glass

Polyurethane 310ml Non Toxic Silicone Sealant Clear Silicone Adhesive For Glass

High Performance Waterproof Hot selling black polyurethane auto windshield pu sealant

Art No. A1000

Silicone Polyurethane sealant is one component direct glazing polyurethane adhesive, can be used for the high strength adhesion of the glass and the body of the automobile.

Production description for CLEAR 310ml silicone adhesive for glass clear silicone adhesive non toxic silicone sealant

1. low odor, neutral cure, mildew resistant, noncorrosive silicone adhesive/sealant.

2. It can be adhere ceramic tile to many substrates such as acrylic, fiberglass, ABS, PVC, wood and masonry.

3. It also provides an excellent seal for spa jets and fittings. Ideal for bathroom tile installations.

4. Waterproof/weatherproof seal.

5. Non-sag formula, Chlorine resistance.

Key Features

1. Single component, moisture curing, no dripping for vertical application
2. Good elasticity and initial adhesion, high bonding strength
3. Can withstand high strength dynamic loads; no sagging while interrupting gluing
4. Good Adhesion with various substrates such as glass, aluminum plate etc.
5. Paintable and polishable surface, outstanding application property
6. No corrosion on base material, no penetration pollution, little volatile smell
7. Good aging resistance and weather resistance

Typical Applications

Used for the high strength adhesion of the glass and the body of various vehicles.

Directions for Use

Tool: Pneumatic plunger caulking gun

Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.

Steps:

1. Cut nozzle to give the required angle and bead size

2. Pierce the membrane at the top of the cartridge and screw on the nozzle

3. Place the cartridge in an applicator gun and squeeze the trigger with equal strength

Packing:

Shelf Life: 12 months

Caution:

1. Sealant should be applied when room is sufficiently ventilated.
2. Avoid contact with eyes.
3. KEEP IT OUT OF REACH OF CHILDREN;
4. Store it in cool, dry and well-ventilated place below 27 degrees
5. Keep away from fire source;